CS CENTER

대표전화.
02-766-1732
Fax.
02-766-1734
Email.
info@samheung.com

Today's0

RiOs™ 30/50/100/150/200 Water Purification System

RiOs™ systems are ideal for laboratories needing reliable production of Reverse Osmosis, RO (Type 3) water from potable tap water. RO pure water produced by RiOs™ systems is ideal for non-critical laboratory applications, such as:


Glassware rinsing

Hydroponics

Water baths

Feed water for humidifiers, autoclaves, glassware washers, washing machines

Feed water for ultrapure water systems

  • 제품정보 (특징)

    RiOs™ systems are ideal for laboratories needing reliable production of Reverse Osmosis, RO (Type 3) water from potable tap water. RO pure water produced by RiOs™ systems is ideal for non-critical laboratory applications, such as:


    Glassware rinsing

    Hydroponics

    Water baths

    Feed water for humidifiers, autoclaves, glassware washers, washing machines

    Feed water for ultrapure water systems

    Systems are available in 30, 50, 100, 150 and 200 liter models to match the specific volume needs of your laboratory. They can provide up to 8000 L of RO water per day. RiOs™ can be integrated into a centralized system, providing total control of all parameters within the system itself as well as within the external pure water distribution loop.


    RiOs™ water • Intelligent purification

    RiOs™ is built on an optimized and efficient purification sequence: Tap water first enters the Progard® pretreatment cartridge which efficiently removes particles & colloids, free chlorine and hardness. Pretreated water passes through the reverse osmosis membrane which removes up to 99% of all ionic & organic contaminants, microorganisms and particles. The benefits of RiOs™ intelligent reverse osmosis are:


    No risk of water shortage, even in winter – intelligent RO adapts its production rate to tap water temperature (7-30°C).

    Continuously, high quality RO permeate – intelligent RO is always working to the best of its ability, discarding primary low-quality permeate, protecting downstream purification technologies.

    Environment conscious, water savings – intelligent RO optimizes the recovery of rejected water and in turn maximizes Progard® lifetime.

    One complete purification and control unit

    System provides total control of all functions, operating parameters and standard accessory components within the unit itself and on the external pure water distribution loop.


    Built-in UV lamp for bacteria-sensitive applications

    Easy-to-replace pretreatment packs, tailored to the feed water source

    Built-in conductivity monitoring to ensure water quality

    Advanced support & validation

    A complete range of Services, including Validation support, is provided by certified Field Service Engineers using calibrated equipment and Qualification Workbooks. For full confidence in your RiOs™ system, it is delivered with a Certificate of Calibration for the built-in temperature and resistivity meters, and a Certificate of Conformity ensuring that it has been built and tested fully assembled following internal Standard Operating Procedures. The manufacturing site is ISO® 9001 v.2000 and ISO® 140001 certified.


    Water Specifications

    RiOs™ Large RO water (Type 3)

    Ionic rejection> 95 %
    Organic rejection for MW > 200 Dalton> 99 %
    Particulates rejection> 99 %
    Bacteria< 10 CFU/mL
    Production flow Rate30 L/h (RiOs™ 30)
    50 L/h (RiOs™ 50)
    100 L/h (RiOs™ 100)
    150 L/h (RiOs™ 150)
    200 L/h (RiOs™ 200)

    Feed water

    water qualityPotable tap water
    Feed water conductivity at 25°C< 2000 µS/cm
    Feed water pressure2 - 6 bar
    Feed water temperature5 - 35°C
    Feed water chlorineApplication Specialist will determine pretreatment required
    Feed water fouling indexApplication Specialist will determine pretreatment required
    Feed water pH4 - 10 pH units
    Feed water connection½ in Gaz M

    System Specifications

    Dimensions (H x W x D)734 x 662 x 441 mm (28.9 x 26.1 x 17.4 in)
    Operating weight33 - 40 kg (72.8 - 88.2 lb)
    Data port connectionRS232

    Safety

    RiOs™ systems are tested by an independent and accredited company for compliance with the CE directives related to safety and electromagnetic compatibility. The report can be consulted on demand. RiOs™ systems are built using components and practices recommended by UL and have been cUL marked. The registration can be verified on the UL web site ( http://www.ul.com).