Suction Cleaning & washing Table

* 윌라드(Willard)사의 Suction Cleaning and washing table입니다.

  중간 수준의 Suction(흡기) 압력이 제공되는 데, 압력의 정도를 조절할 수 있습니다.

  많은 물을 필요로 하는 유수(flowing water)방식에 의한 섬유류 유물이나 세척과 헹굼 작업용으로 사용합니다.

* 상부의 타공 작업대를 제거하면 침수 또는 자연 유수방식의 세척이 가능한 Laboratory sink 로도 사용할 수 있습니다. (유물 석션 세척조)

  • 제품정보 (특징)

    The Willard Suction Cleaning and washing Table is designed for controllable medium pressure,
    induced flow washing and rinsing where larger quantities of water are required.

    It may also be used as a large sink unit for immersion and gravity flow washing.

    The equipment consists of 3 main parts.

    A, Removable, perforated suction top.

    B, Stainless steel washing tank (or sink) with smooth rolled edges, extra thick base and tilting

    C,Support frame on heavy duty lockable castors and a full width shelf for the storage of trays and

    An optional height adjustment feature allows an optimum height to be achieved in both modes. An
    optional clear acrylic hood with access areas can also be ordered to fit over the perforated top

    Mode: 1. With suction top in place and exhauster connected it is suitable for high volume induced
    flow treatments. Air extracted through ports in the periphery of the work surface create negative
    pressure drawing water, washing solutions and air through the object and the perforated sheet into
    the tank below for eventual drainage.

    Mode: 2. With the suction top removed the tank may be used as a laboratory sink. The tilting
    mechanism allows for efficient drainage and gravity flow washing. In addition to handling full
    sized items, this configuration is exceedingly useful for containment and drainage when treating
    a number of smaller items in trays.

  • textile_suction_washing_table_6.jpgtextile_suction_washing_table_4.jpg